Up for sale are a large quantity of 304 stainless steel electropolished tubing (similar to SpeedRail) as well as multiple fittings for different applications.
This tubing is commonly used for harsh environments where liquids or corrosives are present, such as breweries, factories, or on boats or docks or anywhere that is exposed to saltwater.
It is also often used for architectural purposes, for handrails and fixtures in retail stores, etc.
These came from a pharma production facility, and all are clean and in good shape with no holes drilled, no cracks, bends, etc.
There are two diameters of tube, the larger stuff is 42mm OD and has a 3mm wall thickness.
The smaller stuff (there are only 4 pieces of it) is 33mm OD with a 3mm wall thickness.
In total I have:
42mm OD:
12 pieces @ 31.
5"
8 pieces @ 9.
75"
33mm OD:
1 piece @ 35.
25"
For the fittings there are:
24 round end flanges (44mm ID, 3.
75" flange diameter)
1 rectangular end flange (2.
75" x 7.
5" plate size)
10 90-degree open-jaw clamps (44mm open side, 33mm closed side)
4 90-degree closed clamps (44mm one side, 33mm other side)
16 corner elbows (44mm ID)
8 sleeves with tab (33mm ID)
These were all made by Patel in India.
OnlineMetals.
com sells their 1.
5" OD x 0.
12" wall thickness 304 stainless polished tube for $267 for a single 6 foot piece! Even the unpolished stuff is $150 for a 6 foot piece.
That's $25 per foot for unpolished, $44 per foot for polished.
I'm asking much less than that -- just $10 per foot and $10 per fitting.
That means one of the 31.
5" pieces would be $25, etc.
If you want it all, I'm happy to entertain a fair offer as well.
Located in North Park, a few blocks from Morley Field.
Send me a message if you want to set up a time to come see it.
Whatsapp
