Up for sale is an industrial liqiud-to-air heat exchanger which was removed from a piece of German-made factory equipment.
The heat exchanger functions as it should (it exchanges heat) and is in good shape -- the equipment it was removed from was in working order when it was disassembled.
Manufactured in the late-1990's, the internals of this heat exchanger are factory-made but the outer box is custom made at the facility where the equipment was built.
The box is made from sheet aluminum with fiberglass insulation.
It's a mystery what brand or model the heat exchanger core itself is.
.
.
it might be on a data plate on the core, but the housing has not been opened to check.
The heat exchanger has one flanged liquid inlet and one flanged liquid outlet.
It has straight 3.
5" diameter inlet/outlets for air meant for slip connections with hose clamps.
The air inlet/outlets are stainless steel, the liquid inlet/outlet pipes are mild steel.
There are 4 feet which are connected to the main core inside the housing and extend through the sheet aluminum housing, so that this can be securely bolted down.
Overall measurements including all pipes and feet are 30" wide, 23" tall, and 15" deep.
The box-shaped housing itself is 20" wide, 22" high, and 12" deep.
Weight is estimated around 165lbs.
This would be useful for a number of things, from providing heat to a battery bank for solar energy storage, to recovering waste heat on a boat or in an RV, etc.
.
.
pretty much any situation where you need to exchange heat/cool between liquid and air.
New these types of heat exchangers are super expensive.
.
.
I'm listing this one for just $525 OBO.
Located in El Cajon, near Gillespie Field.
I can help you load into your truck.
Contact me to set up a time to come take a look!
Whatsapp
